Tremolo arm - Hobbies

Some electric guitars have a tremolo arm (sometimes called a "whammy bar" or "vibrato arm" and occasionally abbreviated as trem), a lever attached to the bridge which can slacken or tighten the strings temporarily, changing the pitch, thereby creating a vibrato or a portamento effect. The name "tremolo bar" is somewhat misleading. It would be more accurate and appropriate to call it a vibrato bar. Tremolo is a fluctuation of volume. Vibrato is a fluctuation of pitch, which is what the whammy bar produces. Early vibrato systems, such as the Bigsby vibrato tailpiece, tended to be unreliable and cause the guitar to go out of tune quite easily, and also had a limited range. Later Fender designs were better, but Fender held the patent on these, so other companies used Bigsby-style vibrato for many years.

With the expiration of the Fender patent on the Stratocaster-style vibrato, various improvements on this type of internal, multi-spring vibrato system are now available. Floyd Rose introduced one of the first improvements on the vibrato system in many years when in the late 1970s he began to experiment with "locking" nuts and bridges which work to prevent the guitar from losing tuning even under the most heavy whammy bar acrobatics.

Electric guitar necks can vary according to composition as well as shape. The primary metric used to describe a guitar neck is the scale, which is the overall length of the strings from the nut to the bridge. A typical Fender guitar uses a 25.5 inch scale, while Gibson uses a 24.75 inch scale in their Les Paul. While Gibson's scale has often claimed to be 24.75", it has varied through the years by as much as a half inch. The frets are placed proportionally according to the scale length; thus, the smaller the scale, the tighter the spacing of the frets.

Necks are described as bolt-on, set-in, or neck-through depending on how they are attached to the body. Set-in necks are glued to the body in the factory, and are said to have a warmer tone and greater sustain; this is the most traditional type of joint. Bolt-on necks were pioneered by Leo Fender to facilitate easy adjustment and replacement of the guitar neck. Neck-through instruments extend the neck itself to form the center of the guitar body, and are known for long sustain and for being particularly sturdy. While a set neck can be carefully unglued by a skilled luthier, and a bolt-on neck can simply be unscrewed, a neck-through design is difficult or even impossible to repair, depending on the damage. Historically, the bolt-on style has been more popular for ease of installation and adjustment; since bolt-on necks can be easily removed, there is an after-market in replacement bolt-on necks from companies such as Warmoth and Mighty Mite. Some instruments, notably most G ibson models, have continued to use set/glued necks. Neck-through bodies are somewhat more common in bass guitars.

The materials used in the manufacture of the neck have great influence over the tone of the instrument. Hardwoods are very much preferred, with maple, ash, and mahogany topping the list. The neck and fingerboard can be made from different materials, such as a maple neck with a rosewood fingerboard. In the 1980s, exotic man-made materials such as graphite began to be used, but are pricey and never have replaced wood in production instruments. Such necks can be retrofitted to existing bolt-on instruments.

There are several different neck shapes used on guitars, including shapes known as C necks, U necks, and V necks. These refer to the cross-sectional shape of the neck (especially near the nut). There are also several sizes of fret wire available, with traditional players often preferring thin frets, and metal shredders liking thick frets. Thin frets are considered better for playing chords, while thick frets allow lead guitarists to bend notes with less effort. An electric guitar with a neck which folds back called the "Foldaxe" was designed and built for Chet Atkins by Roger C. Field (featured in Atkins' book "Me and My Guitars."). Steinberger guitars developed a line of exotic instruments without headstocks, with tuning done on the bridge instead.

Finden sie hier mehr zu Tonhoelzer